Infusion pump calibration services for volumetric and syringe pumps
Flow rate, bolus volume, occlusion pressure and alarms verified with a calibrated infusion device analyser, at your hospital, ward by ward.
What our infusion pump calibration services include
Pumps deliver drugs where small rate errors matter: inotropes, sedatives, insulin, heparin, oxytocin and neonatal fluids. Worn plunger drivers, tired peristaltic mechanisms, sticky pressure sensors and incorrect syringe brand settings all change delivery without any obvious sign at the bedside.
Flow rate testing is done with an infusion device analyser that measures delivered volume over time. We test each pump at more than one rate, typically a low and a mid-range rate that reflect clinical use, and record the percentage deviation against the manufacturer's stated accuracy.
Syringe pump calibration also checks plunger detection, syringe size recognition and near-empty and end-of-infusion alarms. Pumps are usually covered in the same visit as patient monitor calibration under a wider medical equipment calibration schedule.
Why syringe pump calibration and flow rate testing matter
Dose accuracy
A pump that runs fast or slow changes the dose given over hours. Measured flow rate testing shows the real delivery.
Occlusion response
A blocked line must raise an alarm promptly. Occlusion pressure and alarm time are measured, not assumed.
Fleet visibility
Hospitals often have many pumps of mixed age. A per-pump certificate shows which units need service or retirement.
Parameters checked in infusion pump calibration
- Flow rate accuracy at low and mid-range set rates
- Delivered volume against volume to be infused
- Bolus volume accuracy, where the pump offers bolus
- Occlusion pressure level and occlusion alarm
- Air-in-line detection on volumetric pumps
- Syringe size recognition, plunger detection, near-empty and end alarms
- KVO function, battery operation and charging
- Electrical safety per IEC 62353, plus inspection of clamps, doors and mains lead
Where pumps are calibrated
How often infusion pump calibration services are needed
Most hospitals schedule infusion pump calibration services at least once a year, alongside the manufacturer's preventive maintenance. Pumps used for high-alert medicines or in neonatal care are often prioritised in the schedule.
Pumps should also be tested after a drop, a fluid spill into the mechanism, a repair, a firmware update, or when nurses report unexpected alarms or finishing times that do not match the programme.
Keeping a list of pumps by serial number and location makes recalls and planning simpler. We return results in a format you can add straight to your equipment register.
Keep each certificate with the equipment record, enter the next due date in your maintenance schedule and show both to auditors when asked. We keep a record of due dates for every client and can send a reminder before the next visit is needed, so nothing slips out of calibration between audits.
On-site infusion pump calibration services across Tamil Nadu
Pumps are tested at your hospital, so they are not lost in transit or away from wards for days. We work through pumps ward by ward while keeping enough units available for patients.
We serve hospitals in Salem, Namakkal, Erode, Coimbatore, Dharmapuri, Krishnagiri, Tiruchirappalli and nearby districts. See our hospital calibration services and onsite calibration services.
Each certificate shows pump details, analyser used, set and measured rates, percentage error, occlusion results and measurement uncertainty. Certificates are issued within the laboratory's NABL scope where applicable.
Other bedside equipment to calibrate together
Pumps sit beside ventilators and suction apparatus in most ICUs. Testing them in one visit keeps all critical care records on the same cycle.
How the work is carried out
List
Share pump make, model, serial number and ward. We plan the order to keep wards supplied.
Measure
Each pump is run into a calibrated infusion device analyser at set rates, with bolus and occlusion tests.
Safety
IEC 62353 electrical safety tests and checks of alarms, battery and mechanical parts.
Certify
You receive a certificate per pump and a summary highlighting units outside tolerance.
One accountable team, documented results
NABL-Accredited
Calibration and testing carried out under NABL accreditation and ISO/IEC 17025:2017-compliant procedures.
On-Site & Laboratory Capability
Work carried out at your facility or in our laboratory, by one accountable team.
Serving Since 2022
Serving hospitals, laboratories, pharmaceutical and industrial clients across Tamil Nadu since 2022.
Explore related services
Frequently asked questions
Book infusion pump calibration services
Send your pump list and preferred dates, and we will plan an on-site visit that keeps your wards supplied. Call +91 99949 13872.